Skip to content
FaultCrate

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

Selected vehicle: 2006 · GMC Yukon XL Denali

Change vehicle →

← Back to cases

Source reference 10112399

Manufacturer communication — 2006 GMC YUKON DENALI XL

Fitment confirmedReporter type: ManufacturerEQUIPMENT:ELECTRICALEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)

Relation to the target vehicle

  • The source's vehicle field includes the trim.
Model year
Match 2006 — Source vehicle field
Model
Match YUKON DENALI XL — Source vehicle field
Trim
Match Denali — Source vehicle field

What the manufacturer’s document says

PIC5491D ・ information ・ for GM vehicles in general

Applies to

  • Applies to 2006-2014 GM passenger cars and trucks with OnStar (UE1).

    the passage
    Models: 2006-2014 GM Passenger Cars and Trucks with OnStar (UE1)

Correction

Repair

  • With the fault present, turn the ignition off, cancel RAP and power-cycle the VCIM for 5 minutes.

    the passage
    With the issue present, turn off the ignition, cancel RAP, and perform a 5 minute power cycle of the VCIM.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

  1. Communication summary

    本通知は、電源が入らないOnStarシステムを搭載した車両についての情報を整備士に提供するものです。整備士はイグニッションをオフにして、保持されたアクセサリー電源をキャンセルする必要があります。車両の電源が落ちた後、OnStarモジュールへの電力を五分間遮断してください。電力を五分間遮断した後、OnStarシステムが作動している場合は車両をリリースしてください。OnStarシステムがまだ作動していない場合は、公開されているサービス情報の診断を続行してください。整備士はSTID、ステーションID、またはOnStarカスタマーアイデンティファイアーに応じて、General Motors Technical Assistance Centerに問い合わせる必要がある場合があります。 Machine translation (unreviewed)

    This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics. Technician may need to contact General Motors Technical Assistance Center depending on the STID, Station ID, or OnStar Customer Identifier.
    Go to this passage in the original

Source

Source
NHTSA Manufacturer Communications
Source reference
10112399
Received by source
2017-08-15
Incident date
Unknown

Open original text and sourceOpen the provider's page (external)

Manufacturer communication 10112399 — 2006 GMC YUKON DENALI XL | FaultCrate