Skip to content
FaultCrate
日本語Open preview: everything readable

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

Selected vehicle: 2006 · GMC Yukon XL Denali

Change vehicle →

← Back to cases

Source reference 10112857

Manufacturer communication — 2006 GMC YUKON DENALI XL

Fitment confirmedReporter type: ManufacturerELECTRICAL SYSTEM

Relation to the target vehicle

  • The source's vehicle field includes the trim.
Model year
Match 2006 — Source vehicle field
Model
Match YUKON DENALI XL — Source vehicle field
Trim
Match Denali — Source vehicle field

What the manufacturer’s document says

PIP5094 ・ fault and correction ・ for GM vehicles in general

Applies to

  • 2014 and prior GM cars and light duty trucks.

    the passage
    2014 and prior GM cars and light duty trucks

Finding the cause

Steps to confirm (in the document’s order)

  1. When a test step for open, continuity or resistance requires disconnecting a connector or component, check the pin fit and tension of all related terminals before replacing any component.

    the passage
    When testing any circuit for open or continuity/ resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement.

  2. Always use the recommended terminal test tool for these tests.

    the passage
    Always use the recommended terminal test tool during these tests.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

  1. Communication summary

    この予備情報通知は、回路のオープンまたは抵抗をテストする場合、テスト手順でコネクターまたはコンポーネントの脱着を要する時は、コンポーネント交換前に、すべての関連する端子ピンのフィットとテンションを点検することが不可欠であることを整備士に通知しています。常にこれらのテスト中に推奨される端子テストツールを使用してください。 Machine translation (unreviewed)

    This Preliminary Information communication advises the technician that, when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
    Go to this passage in the original

Source

Source
NHTSA Manufacturer Communications
Source reference
10112857
Received by source
2017-08-15
Incident date
Unknown

Open original text and sourceOpen the provider's page (external)