Skip to content
FaultCrate
日本語Open preview: everything readable

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

Selected vehicle: 2006 · GMC Yukon XL Denali

Change vehicle →

← Back to cases

Source reference 10112935

Manufacturer communication — 2006 GMC YUKON DENALI XL

Fitment confirmedReporter type: ManufacturerELECTRICAL SYSTEM

Relation to the target vehicle

  • The source's vehicle field includes the trim.
Model year
Match 2006 — Source vehicle field
Model
Match YUKON DENALI XL — Source vehicle field
Trim
Match Denali — Source vehicle field

What the manufacturer’s document says

PIC5491B ・ information ・ for GM vehicles in general

Applies to

  • Applies to 2006-2013 GM passenger cars and trucks with OnStar (RPO UE1).

    the passage
    Models: 2006-2013 GM Passenger Cars and Trucks with OnStar Gen7, Gen8, Gen9, and FCP1 (RPO UE1)

Fault

  • The OnStar system will not power up, or no LED is lit and the OnStar button assembly does not respond.

    the passage
    A concern may be identified on a Gen7, Gen8, Gen9, or FCP1 VCIM as OnStar system will not power up or no led lit and no response from the OnStar button assembly.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

  1. Communication summary

    本予備情報通知は、起動しないOnStarシステムを搭載する車両について、整備士に情報を提供するものです。整備士はイグニッションをオフにして、保持されたアクセサリー電源をキャンセルする必要があります。車両が電源オフになった後、OnStarモジュールへの電源を五分間遮断してください。電源が五分間遮断された後、OnStarシステムが作動している場合は車両をリリースしてください。OnStarシステムがまだ作動していない場合は、公表されているサービス情報の診断を続けてください。 Machine translation (unreviewed)

    This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics.
    Go to this passage in the original

Source

Source
NHTSA Manufacturer Communications
Source reference
10112935
Received by source
2017-08-15
Incident date
Unknown

Open original text and sourceOpen the provider's page (external)