Source reference 10113687
Manufacturer communication — 2006 GMC YUKON DENALI XL
Relation to the target vehicle
- The source's vehicle field includes the trim.
- Model year
- Match 2006 — Source vehicle field
- Model
- Match YUKON DENALI XL — Source vehicle field
- Trim
- Match Denali — Source vehicle field
What the manufacturer’s document says
15-08-44-001C ・ information ・ names this vehicle
Applies to
The model list covers 2000-2014 GM Passenger Cars and Light Duty Trucks in general.
the passage
2000-2014 GM Passenger Cars and Light Duty Trucks
It applies to vehicles equipped with OnStar (RPO UE1) and does not apply to vehicles equipped with RPO UE0.
the passage
Equipped with OnStar® (RPO UE1) Attention: This Bulletin does not apply to vehicles equipped with RPO UE0.
Finding the cause
Possible causes
Canadian wireless service providers plan to decommission their 2G CDMA network through 2015, and OnStar depends on functioning 2G CDMA networks to deliver services.
the passage
Canadian wireless service providers plan to decommission their 2G Code Division Multiple Access (CDMA) network through 2015. OnStar® currently depends on active and functioning 2G CDMA networks to deliver services.
Steps to confirm (in the document’s order)
Before starting the upgrade, inspect the radio to verify that the GM original equipment radio is present and functioning.
the passage
Prior to starting the upgrade the technician should inspect the radio to verify that the GM original equipment radio is present and functioning.
Verify the VIN and customer information on the kit against the VIN of the vehicle; do not install the hardware if the VIN does not match.
the passage
Technician will verify VIN and customer information on Kit with VIN of installation vehicle (do not install hardware if VIN does not match).
Correction
Repair
Canadian vehicles that do not have OnStar 3G/4G LTE need a hardware upgrade to keep OnStar services without interruption.
the passage
As a result, in order to continue to provide OnStar® services without interruption, Canadian vehicles that do not have OnStar® 3G/4G LTE will need a hardware upgrade.
The technician uses the Service Programming System (SPS) to activate the hardware.
the passage
Tech will use Service Programming System (SPS) to activate the hardware.
The labor time table gives 1.0 hr for GMC Yukon models 2003-2006.
the passage
GMC Yukon Models 2003-2006 1.0 hr
Parts
The parts chart lists part numbers 23235234, 23242476 and 23242478 for GMC Yukon models 2003-2006.
the passage
GMC Yukon Models 2003-2006 GMC Yukon Models 23235234 23242476 23242478
Part numbers printed in the document
23235234Communication Interface Module With Telephone TransceiverLook up at RockAuto (aftermarket candidates) ↗Search the web ↗
Replaced by: 84248721as stated by GMPartsGiant (checked 2026-10-06) ↗Look up at RockAuto (aftermarket candidates) ↗Search the web ↗
23242476Cable Assembly, Navn Antenna CoaxialLook up at RockAuto (aftermarket candidates) ↗Search the web ↗
Discontinued (no successor stated)as stated by GMPartsGiant (checked 2026-10-06) ↗
23242478Cable Assembly, Navn Antenna CoaxialLook up at RockAuto (aftermarket candidates) ↗Search the web ↗
Discontinued (no successor stated)as stated by GMPartsGiant (checked 2026-10-06) ↗
The numbers are as the document prints them. The name and the replacing number are what the pages of GMPartsGiant, a reseller of genuine parts and not GM, state. Aftermarket equivalents are not checked here (the links only search by number). Confirm the fit for the vehicle (VIN) before ordering.
Caution
Upgrade kits are VIN specific; installing a kit in another vehicle will cause configuration issues and might damage the module.
the passage
Upgrade kits are VIN specific, installing a kit in another vehicle will cause configuration issues and might result in damaging the module.
The Tech 2 cannot communicate with the upgraded OnStar module; GDS 2 must be used for diagnostics specific to the upgraded OnStar system.
the passage
The Tech 2 is not capable of communicating with the upgraded OnStar® module. GDS 2 must be utilized to perform diagnostics specific to the upgraded OnStar® system on these vehicles.
A 10 minute wait is required to avoid configuration errors, and the red OnStar Emergency Button must not be pressed at any time during the installation.
the passage
Notice: A 10 minute wait time is required to avoid configuration errors. Note: Do NOT press the RED (OnStar® Emergency Button) at any time during the installation. This will cause module configuration issues.
What is needed
- Parts and materials
- OnStar module 23235234, female to male cable 23242476, UHF adaptor cable 23242478 (the GMC Yukon Models 2003-2006 row of the module chart)
- Labor time
- OnStar module replacement and cables installation: 1.0 hr (GMC Yukon Models 2003-2006)
- Special tools
- EL-49642 (SPS programming support tool)
- Scan tool
- Program the OnStar module (Telematics Communication Interface Control Module) with SPS, selecting "Reprogram ECU"
Only what the technical documents state. "Not stated" does not mean not needed.
Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.
Stated content
Communication summary
本技術情報はGMカナダOnStar®携帯通信アップグレードに関する情報を提供するものである。 Machine translation (unreviewed)
This informational bulletin provides information on a GM of Canada OnStar® cellular communication upgrade.
Go to this passage in the original
Source
- Source
- NHTSA Manufacturer Communications
- Source reference
- 10113687
- Received by source
- 2017-08-15
- Incident date
- Unknown
Open original text and sourceOpen the provider's page (external)
