Skip to content
FaultCrate

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

← Back to the vehicle

Source reference 10114453

Manufacturer communication — 2000 CHEVROLET SUBURBAN

Reporter type: ManufacturerFUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

Vehicles as recorded

Stated content

  1. Communication summary

    本予備情報通知は、燃料圧レギュレーター交換後にアイドル時にブザー音が発生する可能性がある車両について技術者に情報を提供するものです。技術者は燃料ポンプへのアクセスを確保する必要があります。燃料ポンプへのアクセスを確保した後、キーをオフの位置にした状態で、燃料ポンプからバッテリーポストまでの電圧降下について電力とアースをチェックしてください。技術者はまたピンフィットとターミナルドラッグをチェックする必要があります。技術者は最新バージョンのサービスブリテン04-06-04-088Cを使用して、燃料ポンプコネクターを更新された部品に交換することができます。技術者はUBEC、燃料ポンプリレー、フレームのアース、およびバッテリーケーブルアースの電圧降下ポイントを点検する必要があります。クリンプで過度な抵抗が見つかった場合、影響を受けた回路のクリンプアンドシールスプライススリーブを交換してください。回路に高い抵抗がない場合、部品番号19236428を使用してレギュレーターを交換してください。 Machine translation (unreviewed)

    This Preliminary Information communication provides information to the technician about vehicles that may have a buzz noise at idle after fuel pressure regulator replacement. Technician will need to gain access to the fuel pump. After gaining access to the fuel pump check the power and ground for voltage drop with the key in the off from the fuel pump to the battery post. Technician should also check the pin fit and terminal drag. Technician may replace the fuel pump connector with the updated part using the latest version service bulletin 04-06-04-088C. Technician should inspect voltage drop points at the UBEC, fuel pump relay, ground at the frame and the battery cable grounds. If excessive resistance is found at the crimps, replace the crimp n seal splice sleeves for the affected circuits. If the circuits do not have high resistance replace the regulator using part number 19236428.
    Go to this passage in the original

Source

Source
NHTSA Manufacturer Communications
Source reference
10114453
Received by source
2017-08-15
Incident date
Unknown

Open original text and source

Manufacturer communication 10114453 — 2000 CHEVROLET SUBURBAN | FaultCrate