Manufacturer communication — 2006 GMC YUKON DENALI XL

Fitment confirmedReporter type: ManufacturerSTRUCTURE:BODY

Relation to the target vehicle

The source's vehicle field includes the trim.

Model year: Match 2006 — Source vehicle field
Model: Match YUKON DENALI XL — Source vehicle field
Trim: Match Denali — Source vehicle field

What the manufacturer’s document says

08-08-51-002A ・ information ・ for GM vehicles in general

Applies to

Applies to 2013 and prior GM passenger cars and trucks.
the passage
Models: 2013 and Prior GM Passenger Cars and Trucks

Fault

All fascias except those of the Corvette, Camaro and Cadillac XLR are made of TPO.
the passage
All fascias, with the exception of the Corvette, Camaro and Cadillac XLR, are made of TPO.

Finding the cause

Steps to confirm (in the document’s order)

If unsure of the plastic type, look for the plastic symbol (TPO) on the back of the part.
the passage
If the technician has a question as to the type of plastic they are painting, inspect the back of the part for the plastic symbol (TPO).

Correction

Repair

Wash with soap and water, then clean with a 50% mix of isopropyl alcohol and water (or a waterborne cleaner).
the passage
1. Wash with soap and water. 2. Clean with a 50% mix of isopropyl alcohol and water (or a waterborne cleaner).
Scuff sand as the paint supplier recommends, then reclean with the 50% mix of isopropyl alcohol and water (or a waterborne cleaner).
the passage
3. Scuff sand per your paint supplier's recommendations. Note: The use of a solvent-type cleaner will soften, or begin to dissolve, the primer. Base coats do not have any affect on this primer. 4. Reclean with a 50% mix of isopropyl alcohol and water (or a waterborne cleaner).

Caution

A solvent-type cleaner will soften or begin to dissolve the primer; base coats do not affect this primer.
the passage
Note: The use of a solvent-type cleaner will soften, or begin to dissolve, the primer. Base coats do not have any affect on this primer.

Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.

Stated content

Communication summary
本技術情報通知は、TPO樹脂フェイシアの塗装前処理及びクリーニング工程に関する情報を提供するものである。 Machine translation (unreviewed)
This informational bulletin provides information pre-painting/cleaning process for TPO plastic fascias.
Go to this passage in the original

Source

Source: NHTSA Manufacturer Communications
Source reference: 10133130
Received by source: 2018-04-16
Incident date: Unknown

Open original text and source Open the provider's page (external)