Source reference 10140434
Manufacturer communication — 2006 GMC YUKON DENALI
Relation to the target vehicle
- The source's vehicle field says Yukon; whether it is an XL is not stated.
- Model year
- Match 2006 — Source vehicle field
- Model
- Unknown YUKON DENALI — Source vehicle field
- Trim
- Match Denali — Source vehicle field
What the manufacturer’s document says
05-02-32-008F ・ fault and correction ・ names this vehicle
Applies to
The model list names 2003-2006 GMC Yukon, Yukon Denali and Yukon XL.
the passage
2003-2006 GMC Yukon, Yukon Denali, Yukon XL
Fault
In rare cases there is a lack of steering assist when stopped or during parking lot type maneuvers.
the passage
In rare cases, customers may comment on a lack of steering assist when stopped or during parking lot type maneuvers.
The condition goes away or greatly improves once the vehicle begins to move or is above parking lot speeds.
the passage
This condition will go away or greatly improve once the vehicle begins to move or is above parking lot speeds.
Finding the cause
Possible causes
The concern can be aggravated by worn tires, low tire air pressure, low power steering pump pressures, and tires larger than stock size.
the passage
This concern can be aggravated by worn tires, low tire air pressure, low power steering pump pressures, and tires larger than stock size.
Steps to confirm (in the document’s order)
Perform the "Power Steering System Test" found in SI and make any necessary repairs based on system diagnosis.
the passage
Perform the "Power Steering System Test" found in SI. Make any necessary repairs based on system diagnosis.
To tell whether a 670 gear box is fitted, inspect the mounting bolts that attach the stub shaft housing; a 670 gear box has only 3 mounting bolts.
the passage
To determine if the vehicle is equipped with a 670 gear box, inspect the mounting bolts that attach the stub shaft housing. A 670 gear box will only have 3 mounting bolts.
Correction
Repair
If a C/K 1500 Series vehicle is equipped with a 670 gear box, replacing it with a 680 gear box may increase the customer satisfaction.
the passage
If a C/K 1500 Series vehicle is equipped with a 670 gear box, replacing it with a 680 gear box may increase the customer satisfaction.
When replacing a 670 gear box with a 680 gear box, replace the power steering gear, union fitting and both inlet O-ring seals.
the passage
If replacing a 670 gear box with a 680 gear box, it will be necessary to replace the power steering gear, union fitting and both inlet O-ring seals.
Parts
Parts (C/K 1500 series only): 88965542 Power Steering Gear, 26025709 Union Fitting, 26001594 Inlet O-ring Seal.
the passage
Parts Information (C/K 1500 Series Only) Part Number Description 88965542 Power Steering Gear 26025709 Union Fitting 26001594 Inlet O-ring Seal
Part numbers printed in the document
88965542Gear, Steering (Remanufacture)Look up at RockAuto (aftermarket candidates) ↗Search the web ↗
Replaced by: 19330495as stated by GMPartsGiant (checked 2026-10-06) ↗Look up at RockAuto (aftermarket candidates) ↗Search the web ↗
26025709Fitting,P/S PumpLook up at RockAuto (aftermarket candidates) ↗Search the web ↗
No successor statedas stated by GMPartsGiant (checked 2026-10-06) ↗
26001594Seal,P/S Fluid Cooling Pipe(O Ring)Look up at RockAuto (aftermarket candidates) ↗Search the web ↗
No successor statedas stated by GMPartsGiant (checked 2026-10-06) ↗
The numbers are as the document prints them. The name and the replacing number are what the pages of GMPartsGiant, a reseller of genuine parts and not GM, state. Aftermarket equivalents are not checked here (the links only search by number). Confirm the fit for the vehicle (VIN) before ordering.
Caution
For C/K 1500 series vehicles, if diagnostics did not lead to any repair, the concern is a normal operating characteristic.
the passage
FOR C/K 1500 SERIES VEHICLES ONLY - If diagnostics did not lead to any repair, this concern is a normal operating characteristic.
If the stub shaft housing has no mounting bolts or has 4 bolts, do not proceed with this bulletin; the vehicle does not have a 670 gear box.
the passage
If the stub shaft housing does not have any mounting bolts or has 4 bolts - DO NOT PROCEED WITH THIS BULLETIN. The vehicle is not equipped with a 670 gear box.
It is recommended in all cases that the proper tire size and the maximum tire pressure are set to the manufacturer's specification on the door placard, especially for the front tires.
the passage
In all cases, it is recommended that the proper tire size and the maximum tire pressure is set according to the manufacturer’s specification as noted on the door placard; especially for the front tires.
Compiled by reading the full text of the document; each point stands on the passage shown. Check the document itself, linked below, before working on a vehicle.
Stated content
Communication summary
本技術情報は、停車時またはパーキングロット走行時のステアリングアシスト不足という顧客の不具合に対応するため、パワーステアリングポンプおよびラインを交換する手順を提供します。 Machine translation (unreviewed)
This technical bulletin provides a procedure to replace the power steering pump and line to correct the customers concern of lack of steering assit when stopped or parking lot manuvers.
Go to this passage in the original
Source
- Source
- NHTSA Manufacturer Communications
- Source reference
- 10140434
- Received by source
- 2018-06-11
- Incident date
- Unknown
Open original text and sourceOpen the provider's page (external)
