Manufacturer communication — 2006 GMC YUKON DENALI XL

• The bulletin is addressed to 2020 and prior GM passenger cars and trucks sold in the U.S. and Canada only.

  the passage

  2020 and Prior GM Passenger Cars and Trucks Attention: This bulletin applies to vehicles sold in the U.S. and Canada Only.

• It is a reference guide for identifying which odometer programming method to use after replacing the instrument panel cluster (IPC).

  the passage

  The purpose of this bulletin is to provide a reference guide to help identify which season odometer programming method to use after replacing the instrument panel cluster (IPC).

Repair

1. The table lists the 2003-2006 Yukon with the odometer value stored in the IPC and SPS as the programming method.

   the passage

   Yukon 2003-2006 IPC SPS

2. The SPS method is IPC reprogramming and setup using the service programming system (SPS).

   the passage

   IPC reprogramming and setup using the service programming system (SPS).

Caution

• Vehicles not listed in the document need to follow the SPS Programming for Odometer.

  the passage

  Any vehicles not listed in this document need to follow the SPS Programming for Odometer.

• Stable battery voltage is critical during programming; any fluctuation, spiking, over voltage or loss of voltage will interrupt it.

  the passage

  Stable battery voltage is critical during programming. Any fluctuation, spiking, over voltage or loss of voltage will interrupt programming.

• Install the EL-49642 SPS Programming Support Tool (GM Dealer Equipment Item #PSC-550) to maintain system voltage; if not available, connect a fully charged 12V jumper or booster pack disconnected from the AC supply, and do not connect a battery charger.

  the passage

  Install the EL-49642 SPS Programming Support Tool (GM Dealer Equipment Item #PSC-550) to maintain system voltage. If not available, connect a fully charged 12V jumper or booster pack disconnected from the AC voltage supply. DO NOT connect a battery charger.