Skip to content
FaultCrate
日本語Open preview: everything readable

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
1 conditions added

Common on this vehicle:Does not startStalls or shuts offWarning light

Record by record

7 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.

Read the records one by one (6)

Known issuesPasslock theft deterrent: starts then stalls / no-start with security lamp4

  1. Manufacturer communication2000–2001 GMC YUKON ・ 2002-02-13

    Security Lamp Illumination and Engine Stalls Information

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      INFORMATION REGARDING SECURITY LAMP ILLUMINATION ON THE INSTUMENT PANEL, ENGINE STALLS. *YH

      What the documents say to do

      Passlock theft deterrent: starts then stalls / no-start with security lamp

      Confirm

      • A security lamp flashing after an attempted start means the fuel disable command is active.

      Repair

      • The condition is the Security lamp illuminated on the instrument panel, engine stalls or no start, with DTC B2960 (Security System Sensor Data Incorrect but Valid) set; the correction is to inspect and repair the cause of DTC B2960.

      Caution

      • Loss of Ignition 1 voltage to the BCM gives the same start-then-stall behaviour.
    Read the sentences of the record
    Remedy
    INFORMATION REGARDING SECURITY LAMP ILLUMINATION ON THE INSTUMENT PANEL, ENGINE STALLS. *YH

  2. Manufacturer communication2000–2001 GMC YUKON ・ 2001-11-19

    Security Lamp and Engine Stall Issues with DTC B2960

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      INFORMATION REGARDING SECURITY LAMP ILLUMINATING ON THE INSTRUMENT PANEL, ENGINE STALL, NO START, AND DIAGNOSIC TROUBLE CODE B2960. *SLC

      What the documents say to do

      Passlock theft deterrent: starts then stalls / no-start with security lamp

      Confirm

      • A security lamp flashing after an attempted start means the fuel disable command is active.

      Repair

      • The condition is the Security lamp illuminated on the instrument panel, engine stalls or no start, with DTC B2960 (Security System Sensor Data Incorrect but Valid) set; the correction is to inspect and repair the cause of DTC B2960.

      Caution

      • Loss of Ignition 1 voltage to the BCM gives the same start-then-stall behaviour.
    Read the sentences of the record
    Remedy
    INFORMATION REGARDING SECURITY LAMP ILLUMINATING ON THE INSTRUMENT PANEL, ENGINE STALL, NO START, AND DIAGNOSIC TROUBLE CODE B2960. *SLC

  3. Manufacturer communication2000–2001 GMC YUKON ・ 2001-10-26

    Security Lamp and Engine Stall Condition – DTC B2960

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      SOME VEHICLES MAY EXHIBIT A SECURITY LAMP ILLUMINATED ON THE INSTRUMENT PANEL, ENGINE STALL, NO START CONDITION, AND DIAGNOSTIC TROUBLE CODE B2960. *TT

      What the documents say to do

      Passlock theft deterrent: starts then stalls / no-start with security lamp

      Confirm

      • A security lamp flashing after an attempted start means the fuel disable command is active.

      Repair

      • The condition is the Security lamp illuminated on the instrument panel, engine stalls or no start, with DTC B2960 (Security System Sensor Data Incorrect but Valid) set; the correction is to inspect and repair the cause of DTC B2960.

      Caution

      • Loss of Ignition 1 voltage to the BCM gives the same start-then-stall behaviour.
    Read the sentences of the record
    Remedy
    SOME VEHICLES MAY EXHIBIT A SECURITY LAMP ILLUMINATED ON THE INSTRUMENT PANEL, ENGINE STALL, NO START CONDITION, AND DIAGNOSTIC TROUBLE CODE B2960. *TT

  4. Manufacturer communication2000–2001 GMC YUKON ・ 2001-06-28

    Security lamp illumination and engine starting issues notification

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      SOME CUSTOMERS MAY HAVE CONCERNS WITH THE SECURITY LAMP ILLUMINATING WHILE DRIVING; THE SECURITY LAMP MAY BE ON OR OFF; THE ENGINE CRANKS BUT WILL NOT START AND THE SECURITY LAMP IS FLASHING; AND / OR THE ENGINE STARTS THEN STALLS AND THE SECURITY LAMP IS FLASHING. *TT

      What the documents say to do

      Passlock theft deterrent: starts then stalls / no-start with security lamp

      Confirm

      • A security lamp flashing after an attempted start means the fuel disable command is active.

      Repair

      • The condition is the Security lamp illuminated on the instrument panel, engine stalls or no start, with DTC B2960 (Security System Sensor Data Incorrect but Valid) set; the correction is to inspect and repair the cause of DTC B2960.

      Caution

      • Loss of Ignition 1 voltage to the BCM gives the same start-then-stall behaviour.
    Read the sentences of the record
    Remedy
    SOME CUSTOMERS MAY HAVE CONCERNS WITH THE SECURITY LAMP ILLUMINATING WHILE DRIVING; THE SECURITY LAMP MAY BE ON OR OFF; THE ENGINE CRANKS BUT WILL NOT START AND THE SECURITY LAMP IS FLASHING; AND / OR THE ENGINE STARTS THEN STALLS AND THE SECURITY LAMP IS FLASHING. *TT

No component category1

  1. Manufacturer communication2000–2001 GMC C/K PICKUP AND UTILITY MODELS (YUKON) ・ 2001-08-01(also printed in 1 other issues)

    Security lamp on, stall or no start, DTC B2960 (revision A) (bulletin 01-08-56-002A)

    1. 1Fault

    2. 2Finding the cause

      Not stated

    3. 3Correction

      Repair

      • The condition is the Security lamp illuminated on the instrument panel, engine stalls or no start, with DTC B2960 (Security System Sensor Data Incorrect but Valid) set; the correction is to inspect and repair the cause of DTC B2960.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：Bulletin 01-08-56-002A replaces 01-08-56-002 and applies to 1999-2001 Chevrolet and GMC C/K Pickup and Utility Models with DTC B2960 set.
    • Repair：The condition is the Security lamp illuminated on the instrument panel, engine stalls or no start, with DTC B2960 (Security System Sensor Data Incorrect but Valid) set; the correction is to inspect and repair the cause of DTC B2960.

    Open this issue of GM TechLink ↗ The points above are read from an article of TechLink, GM’s monthly publication for dealership technicians. The article itself is not reproduced here.

    Remedy
    This review of service bulletins released through mid-July 01-08-56-002A; replaces 01-08-56- 002; Security Lamp Illuminated on the IP, Engine Stalls, No Start, DTC B2960 (Security System Sensor Data Incorrect but Valid) Set (Inspect and Repair Cause of DTC B2960); 1999-2001 Chevrolet and GMC C/K Pickup and Utility Models Security Lamp Illuminated on the IP, Engine Stalls, No Start, DTC B2960 (Security System Sensor Data Incorrect but Valid) Set (Inspect and Repair Cause of DTC B2960)

EQUIPMENT1

  1. Manufacturer communication2003–2006 GMC YUKON DENALI ・ 2018-05-07

    Technical Information Bulletin

    1. 1Fault

      • It is a table of field product reminders listing, per model year and vehicle line/condition, what to do, what not to do, and the reference bulletin.
      • The only row naming Yukon covers 2014-2015 Tahoe, Suburban, Silverado, Sierra, Yukon XL and Yukon: intermittent no start, security lamp illuminated, DTCs B3935 and B2955 set.

    2. 2Finding the cause

      Not stated

    3. 3Correction

      Repair

      • For that row the table says to reprogram the BCM only in the event of security system codes, and lists as the thing not to do reprogramming the BCM for any no-start issue that does not include B3935 or B2955; the reference is PI1180A.
    Read the sentences of the record

    From the manufacturer’s document

    • Applies to：The bulletin is addressed to 2015 and prior GM passenger cars and trucks.
    • Condition：It is a table of field product reminders listing, per model year and vehicle line/condition, what to do, what not to do, and the reference bulletin.
    • Condition：The only row naming Yukon covers 2014-2015 Tahoe, Suburban, Silverado, Sierra, Yukon XL and Yukon: intermittent no start, security lamp illuminated, DTCs B3935 and B2955 set.
    • Repair：For that row the table says to reprogram the BCM only in the event of security system codes, and lists as the thing not to do reprogramming the BCM for any no-start issue that does not include B3935 or B2955; the reference is PI1180A.

    Open the manufacturer’s document (PDF) ↗ The points above were read from this document.

    Remedy
    This information bulletin provides the technician with additional information on fixing the vehicle right the first time by listing possible concerns to specific vehicles.

Showing 6 of the 7 you can open. Narrow the search to see the rest.