GMC Yukon 2000–2006
Common on this vehicle:Warning lightNoiseLoss of engine power, no accelerationCorrosion or rustGauge or instrument faultAir conditioning or heaterLights (headlights, turn signals)Does not start
Record by record
22 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.
Symptom
Component named as the cause
Work done
How it is said to have ended
- says it held for a while1
- says it came back1
- says it did not fix it2
- result not stated2
A ribbon is as wide as the records that state both of its ends (only the commonest are drawn). A record that names several symptoms or components runs through each. Orange is records that say the fault came back or was not fixed. Results come from owners’ reports only; one that does not say is “result not stated”. None of this is a likelihood of a cause or a rate at which work succeeds.
Read the records one by one (22)
Known issuesService Stability message with DTC C0131, C0196, C0290 and/or C02922
Manufacturer communication2004–2006 GMC YUKON ・ 2005-05-13
Service Stability Message, DTC C0131, C0196, C0290 and/or C0292
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- SERVICE STABILITY MESSAGE ON, DIAGNOSTIC TROUBLE CODE (DTC) C0131, C0196, C0290 AND/OR C0292 SET. *TT
Manufacturer communication2004–2005 GMC YUKON ・ 2005-04-21
Service Stability Message Displayed in DIC
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- SERVICE STABILITY MESSAGE DISPLAYED IN THE DIC. DIAGNOSTIC TROUBLE CODES C0290, C0292, C0131, OR C0196 SET IN THE EBCM. *TT
Known issuesIntermittent no start with Service Stability, ABS light, 'Unknown Driver' and multiple DTCs / no module communication1
Manufacturer communication2003–2006 GMC YUKON ・ 2003-12-05
Intermittent No Start, Stability Message, ABS Light
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- INTERMITTENT NO START, SERVICE STABILITY MESSAGE, ANTI-LOCK BRAKE SYSTEM (ABS) LIGHT ILLUMINATED, MULTIPLE DIAGNOSTIC TROUBLE CODES (DTCS), DIC SHOWS UNKNOWN DRIVER, VARIOUS ELECTRICAL RELATED CONDITIONS. INCLUDES ESCALADE ESV AND EXT MODEL. *TT
Known issuesStability System Disabled / Service Stability message with DTC C0455 (bent terminals at the steering wheel position sensor)1
Manufacturer communication2005 GMC FULL SIZE UTILITIES (YUKON) ・ 2005-07-01
1Fault
- Owners may comment on a Stability System Disabled or Service Stability message with DTC C0455.
2Finding the cause
Possible causes
- The concern may be caused by bent terminals on the SWPS (Steering Wheel Position Sensor).
Steps to confirm (in the document’s order)
- Remove the SWPS connector and inspect for bent terminals.
3Correction
Repair
- In most cases the terminals can be straightened without replacing the sensor.
Read the sentences of the record
From the manufacturer’s document
- Applies to:Applies to 2005 Cadillac, Chevrolet and GMC Full Size Utilities with RPO JL4.
- Condition:Owners may comment on a Stability System Disabled or Service Stability message with DTC C0455.
- Cause:The concern may be caused by bent terminals on the SWPS (Steering Wheel Position Sensor).
- Confirm:Remove the SWPS connector and inspect for bent terminals.
- Repair:In most cases the terminals can be straightened without replacing the sensor.
Open this issue of GM TechLink ↗ The points above are read from an article of TechLink, GM’s monthly publication for dealership technicians. The article itself is not reproduced here.
- Remedy
- Stability System This information applies to 2005 Cadillac, Chevrolet, and GMC Full Size Utilities with RPO JL4. Owners may comment on a Stability System Disabled or Service Stability message with DTC C0455. This concern may be caused by bent terminals on the SWPS (Steering Wheel Position Sensor). Remove the SWPS connector and inspect for bent terminals. In most cases, the terminals can be straightened without having to replace the sensor.
Known issuesStability System Disabled message and unwanted StabiliTrak activation (tire wear or mismatched tires)1
Manufacturer communication2002–2006 GMC YUKON ・ 2006-07-01
Stability System Disabled message and unwanted StabiliTrak activation: check tire wear and mismatch
1Fault
- The Driver Information Center (DIC) may display the Stability System Disabled message.
- Other concerns are unwanted Stabilitrak activation, noticeable dimming of the vehicle lighting systems, and the VSES motor coming on unexpectedly.
2Finding the cause
Possible causes
- One example that could cause these conditions is two brand new tires with the other two tires excessively worn.
- Another example is aftermarket wheels and tires, such as non-OEM 20 inch wheels with sand tires.
Steps to confirm (in the document’s order)
- Check for excessive wear on the tires and verify that all the tires are the same size, brand and model.
3Correction
What the documents say to do
Stability System Disabled message and unwanted StabiliTrak activation (tire wear or mismatched tires)Confirm
- Check for excessive wear on the tires and verify that all the tires are the same size, brand and model.
Read the sentences of the record
From the manufacturer’s document
- Applies to:The information applies to 2002-06 Cadillac Escalade, Chevrolet Avalanche, Suburban, Tahoe, GMC Yukon and Denali with RPO JL4.
- Condition:The Driver Information Center (DIC) may display the Stability System Disabled message.
- Condition:Other concerns are unwanted Stabilitrak activation, noticeable dimming of the vehicle lighting systems, and the VSES motor coming on unexpectedly.
- Confirm:Check for excessive wear on the tires and verify that all the tires are the same size, brand and model.
- Cause:One example that could cause these conditions is two brand new tires with the other two tires excessively worn.
- Cause:Another example is aftermarket wheels and tires, such as non-OEM 20 inch wheels with sand tires.
Open this issue of GM TechLink ↗ The points above are read from an article of TechLink, GM’s monthly publication for dealership technicians. The article itself is not reproduced here.
- Remedy
- Stabilitrak Disable Message This information applies to the 2002-06 Cadillac Escalade, Chevrolet Avalanche, Suburban, Tahoe, GMC Yukon and Denali with RPO JL4. - Stability System Disabled message displayed on the Driver Information Center (DIC) - unwanted Stabilitrak activation - vehicle lighting systems may dim noticeably - VSES motor may come on unexpectedly Check for excessive wear on the tires on the vehicle and verify that all the tires are the same size, brand, and model. The following examples could cause any of the conditions listed above. - two tires on the vehicle are brand new and the other two tires have excessive wear - Aftermarket wheels and tires (non-OEM 20 inch wheels with sand tires)
ELECTRICAL SYSTEM7
Owner complaint2003 GMC YUKON DENALI ・ 2011-11-22
Instrument cluster, stability control, and reduced engine power issues
1Fault
2Finding the cause
3Correction
Read the sentences of the record
- Fault
- DECEMBER 2008- INSTRUMENT CLUSTER WENT OUT- SPEEDOMETER NO LONGER WORKING DECEMBER 2008- BATTERY GAUGE NO LONGER WORKING MARCH 2009- STABILITRAK ISSUES...SOMETIMES THE STABILITRAK WOULD WORK AND AT TIMES IT WOULD NOT WORK JULY 2009 TO JANUARY 2010- REDUCED ENGINE POWER (ALMOST CAUSE 2 WRECKS) COULD NOT PERFORM A DIAGNOSIS...COULD NOT READ COMPUTER. (1 more)
- Remedy
- CHANGED FUEL PUMP.
Manufacturer communication2005 GMC YUKON ・ 2005-10-24
Stability System Disabled or Service Stability Message with DTC C0455
1Fault
2Finding the cause
Not stated
3Correction
STABILITY SYSTEM DISABLED OR SERVICE STABILITY MESSAGE WITH DIAGNOSTIC TROUBLE CODE C0455. *TT
Read the sentences of the record
- Remedy
- STABILITY SYSTEM DISABLED OR SERVICE STABILITY MESSAGE WITH DIAGNOSTIC TROUBLE CODE C0455. *TT
Owner complaint2004 GMC YUKON ・ 2005-07-12
Brakes engaged without driver input after stability system disabled message
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Fault
- "STABILITY SYSTEM DISABLED" WAS DISPLAYED PRIOR TO THE BRAKES BEING ENGAGED WITHOUT DRIVER INPUT.
- Remedy
- THE VEHICLE WAS TAKEN TO THE DEALER AND A 'YAW SENSOR' REPLACED. (1 more)
Manufacturer communication2004–2005 GMC YUKON ・ 2005-04-19
Service Stability Message Displayed
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- SERVICE STABILITY MESSAGE DISPLAYED. *EH
Manufacturer communication2004 GMC YUKON DENALI ・ 2004-12-14
Intermittent Service Stability Message and DTC C0550
1Fault
2Finding the cause
Not stated
3Correction
INTERMITTENT SERVICE STABILITY MESSAGE DISPLAYED, HISTORY DIAGNOSTIC TROUBLE CODE C0550. *TT
Read the sentences of the record
- Remedy
- INTERMITTENT SERVICE STABILITY MESSAGE DISPLAYED, HISTORY DIAGNOSTIC TROUBLE CODE C0550. *TT
Owner complaint2003 GMC YUKON DENALI ・ 2004-04-19
Headlights and dash lights flicker off and on while driving at night above 35 MPH
1Fault
2Finding the cause
Not stated
3Correction
Not stated
Read the sentences of the record
- Fault
- WHILE DRIVING AT NIGHT THE HEADLIGHTS AND DASH LIGHTS FLICKER OFF AND ON. (1 more)
- Consequence
- I HAVE HAD DRIVERS AHEAD OF ME PULL OVER THINKING THAT I WAS FLASHING MY LIGHTS AT THEM AND OTHER DRIVERS GET IRATE BELIEVING THAT I AM "BRIGHT LIGHTING THEM".
Manufacturer communication2003 GMC YUKON ・ 2003-10-29
Service Stability Message and ABS Telltale in Cold Weather
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- THE SERVICE STABILITY MESSAGE ON THE DIC AND A CODE C0455 DIAGNOSTIC TROUBLE CODE SET AND/OR THEY HAVE A BREAK IN ANTI-LOCK BRAKE SYSTEM (ABS) TELLTALE WITH CHIMING IN COLD WEATHER WITH NO CODE SET. *TT
ELECTRONIC STABILITY CONTROL3
Owner complaint2003 GMC YUKON ・ 2006-11-10
Traction Active indicator illuminates during acceleration, powertrain disengages
1Fault
2Finding the cause
Not stated
3Correction
Not stated
Read the sentences of the record
- Fault
- 40,000 MI.: WHEN ACCELERATING FROM A STOP, THE "TRACTION ACTIVE" DASH DISPLAY WILL VERY OFTEN COME ON, THE POWERTRAIN DISENGAGES AND I HAVE TO LET UP ON GAS UNTIL TRANSMISSION RE-ENGAGES. (1 more)
- Inspection
- A GM DEALER, AFTER EXAM & DIAGNOSTICS, COULD FIND NO PROBLEM, EVEN AFTER BEING ADVISED ABOUT POSSIBLE "WHEEL CORROSION."
- Consequence
- I HAVE ALMOST BEEN REAR-ENDED, SINCE THE DRIVERS BEHIND ME PRESUPPOSE I WILL CONTINUE ACCELERATING.
Manufacturer communication2003–2005 GMC YUKON ・ 2004-08-23
StabiliTrak Malfunction or Disable Message on DIC
1Fault
2Finding the cause
Not stated
3Correction
UNWANTED STABILITRAK ACTIVATION OR STABILITRAK DISABLE MESSAGE APPEARS ON THE DIC. *TT
Read the sentences of the record
- Remedy
- UNWANTED STABILITRAK ACTIVATION OR STABILITRAK DISABLE MESSAGE APPEARS ON THE DIC. *TT
Owner complaint2005 GMC YUKON ・ 2005-09-09
StabiliTrak system caused vehicle lockup at 45 MPH
1Fault
2Finding the cause
3Correction
Not stated
Read the sentences of the record
- Fault
- I WAS DRIVING APPROXIMATELY 45 MPH (= 72.4 km/h) ON MY NORMAL ROUTE, A FAIRLY STRAIGHT ROUTE, WHEN THE VEHICLE MADE A LOUD GRINDING NOISE, BECAME IMPOSSIBLE TO MANEUVER, AND TOTALLY LOCKED UP. (1 more)
- Inspection
- THE DEALERSHIP WAS UNABLE TO PINPOINT THE CAUSE OF MALFUNCTION.
SERVICE BRAKES, HYDRAULIC3
Manufacturer communication2003 GMC YUKON ・ 2005-05-12
Parts Restriction Program for Vehicle Stability Enhancement System (STABILITRAK)
1Fault
2Finding the cause
Not stated
3Correction
PARTS RESTRICTION PROGRAM FOR VEHICLE STABILITY ENHANCEMENT SYSTEM (STABILITRAK). *TT
Read the sentences of the record
- Remedy
- PARTS RESTRICTION PROGRAM FOR VEHICLE STABILITY ENHANCEMENT SYSTEM (STABILITRAK). *TT
Manufacturer communication2003–2004 GMC YUKON ・ 2003-12-04
Service Stability Message and DTCs C0455/C0550 Set
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- SERVICE STABILITY MESSAGE AND DIAGNOSTIC TROUBLE CODES (DTCS) C0455 OR C0550 SET. *TT GM ADMINISTRATIVE MESSATE. *TT
Owner complaint2004 GMC YUKON DENALI ・ 2008-11-12
Traction control message after stop, vehicle sluggish to accelerate
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Fault
- 2004 GMC YUKON DENALI - TRACTION CONTROL MESSAGE COMES ON AFTER A STOP WHEN YOU START TO GO AGAIN AND IT FEELS LIKE THE VEHICLE DOES NOT WANT TO GO.
- Inspection
- WE HAVE TAKEN IT IN SEVERAL TIMES FOR THIS ISSUE BUT COULD NOT FIGURE OUT WHAT IT WAS DUE TO NO CODE IN THE COMPUTER.
ELECTRONIC STABILITY CONTROL (ESC)2
Owner complaint2006 GMC YUKON ・ 2016-09-07
Vehicle bogs down intermittently when starting or turning a corner
1Fault
2Finding the cause
3Correction
Read the sentences of the record
- Fault
- WHEN I AM STARTING OUT OR TURNING A CORNER THE VEHICLE WILL INTERMITTENTLY BOG DOWN. (1 more)
- Cause
- THIS HAS SOMETHING TO DO WITH THE STABILITRAK SYSTEM.
- Remedy
- I JUST DISCONNECT IT AT THE DASH AND PUT UP WITH THE YELLOW WARNING LIGHT.
Owner complaint2003 GMC YUKON DENALI ・ 2015-04-21
Engine power loss with stability control warning at highway speed
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Fault
- MY WIFE WAS DRIVING 75 MPH (= 120.7 km/h) ON THE INTERSTATE WHEN SHE HEARD A "DING" AND THE INFORMATION CENTER SAID "SERVICE STABILITY" "ENGINE POWER REDUCED" IT THEN TOOK ALL ENGINE POWER FROM THE VEHICLE IMMEDIATELY CAUSING IT TO SLOW TO A VERY UNSAFE 20 MPH (= 32.2 km/h) ALMOST INSTANTLY AND CAUSED HER TO NARROWLY AVOID BEING HIT FROM BEHIND. (1 more)
SERVICE BRAKES1
Owner complaint2005 GMC YUKON DENALI ・ 2012-08-15
SERVICE STABILITY warning with intermittent ABS grab causing shaking and speed loss
1Fault
2Finding the cause
3Correction
Not stated
Read the sentences of the record
- Fault
- THE VEHICLE DISPLAY INDICATES "SERVICE STABILITY" AND THE VEHICLES ABS SYSTEM BEGINS TO GRAB INTERMITTENTLY CAUSING THE VEHICLE TO SHAKE AND LOSE SPEED DRASTICALLY. (1 more)
- Cause
- I THOUGHT THAT MAYBE IT WAS FLUKE ISSUE THAT COULD BE EXPLAINED BY WEATHER AS WE HAD EXCEPTIONALLY HOT SUMMER THUS FAR.
UNKNOWN OR OTHER1
Manufacturer communication2004 GMC YUKON ・ 2004-07-03
StabiliTrak Unwanted Activation During Sweeping Turns
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- UNWANTED STABILITRAK ACTIVATION DURING SWEEPING TURNS. *TT
