GMC Yukon 2000–2006
Common on this vehicle:Warning lightDoes not start
Record by record
11 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.
How it is said to have ended
- says it came back1
- says it did not fix it1
- result not stated1
A ribbon is as wide as the records that state both of its ends (only the commonest are drawn). A record that names several symptoms or components runs through each. Orange is records that say the fault came back or was not fixed. Results come from owners’ reports only; one that does not say is “result not stated”. None of this is a likelihood of a cause or a rate at which work succeeds.
Read the records one by one (11)
Known issuesService Stability message with DTC C0131, C0196, C0290 and/or C02922
Manufacturer communication2004–2006 GMC YUKON ・ 2005-05-13
Service Stability Message, DTC C0131, C0196, C0290 and/or C0292
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- SERVICE STABILITY MESSAGE ON, DIAGNOSTIC TROUBLE CODE (DTC) C0131, C0196, C0290 AND/OR C0292 SET. *TT
Manufacturer communication2004–2005 GMC YUKON ・ 2005-04-21
Service Stability Message Displayed in DIC
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- SERVICE STABILITY MESSAGE DISPLAYED IN THE DIC. DIAGNOSTIC TROUBLE CODES C0290, C0292, C0131, OR C0196 SET IN THE EBCM. *TT
Known issuesIntermittent no start with Service Stability, ABS light, 'Unknown Driver' and multiple DTCs / no module communication1
Manufacturer communication2003–2006 GMC YUKON ・ 2003-12-05
Intermittent No Start, Stability Message, ABS Light
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- INTERMITTENT NO START, SERVICE STABILITY MESSAGE, ANTI-LOCK BRAKE SYSTEM (ABS) LIGHT ILLUMINATED, MULTIPLE DIAGNOSTIC TROUBLE CODES (DTCS), DIC SHOWS UNKNOWN DRIVER, VARIOUS ELECTRICAL RELATED CONDITIONS. INCLUDES ESCALADE ESV AND EXT MODEL. *TT
Known issuesStability System Disabled message and unwanted StabiliTrak activation (tire wear or mismatched tires)1
Manufacturer communication2002–2006 GMC YUKON ・ 2006-07-01
Stability System Disabled message and unwanted StabiliTrak activation: check tire wear and mismatch
1Fault
- The Driver Information Center (DIC) may display the Stability System Disabled message.
- Other concerns are unwanted Stabilitrak activation, noticeable dimming of the vehicle lighting systems, and the VSES motor coming on unexpectedly.
2Finding the cause
Possible causes
- One example that could cause these conditions is two brand new tires with the other two tires excessively worn.
- Another example is aftermarket wheels and tires, such as non-OEM 20 inch wheels with sand tires.
Steps to confirm (in the document’s order)
- Check for excessive wear on the tires and verify that all the tires are the same size, brand and model.
3Correction
What the documents say to do
Stability System Disabled message and unwanted StabiliTrak activation (tire wear or mismatched tires)Confirm
- Check for excessive wear on the tires and verify that all the tires are the same size, brand and model.
Read the sentences of the record
From the manufacturer’s document
- Applies to:The information applies to 2002-06 Cadillac Escalade, Chevrolet Avalanche, Suburban, Tahoe, GMC Yukon and Denali with RPO JL4.
- Condition:The Driver Information Center (DIC) may display the Stability System Disabled message.
- Condition:Other concerns are unwanted Stabilitrak activation, noticeable dimming of the vehicle lighting systems, and the VSES motor coming on unexpectedly.
- Confirm:Check for excessive wear on the tires and verify that all the tires are the same size, brand and model.
- Cause:One example that could cause these conditions is two brand new tires with the other two tires excessively worn.
- Cause:Another example is aftermarket wheels and tires, such as non-OEM 20 inch wheels with sand tires.
Open this issue of GM TechLink ↗ The points above are read from an article of TechLink, GM’s monthly publication for dealership technicians. The article itself is not reproduced here.
- Remedy
- Stabilitrak Disable Message This information applies to the 2002-06 Cadillac Escalade, Chevrolet Avalanche, Suburban, Tahoe, GMC Yukon and Denali with RPO JL4. - Stability System Disabled message displayed on the Driver Information Center (DIC) - unwanted Stabilitrak activation - vehicle lighting systems may dim noticeably - VSES motor may come on unexpectedly Check for excessive wear on the tires on the vehicle and verify that all the tires are the same size, brand, and model. The following examples could cause any of the conditions listed above. - two tires on the vehicle are brand new and the other two tires have excessive wear - Aftermarket wheels and tires (non-OEM 20 inch wheels with sand tires)
ELECTRICAL SYSTEM3
Owner complaint2004 GMC YUKON ・ 2005-07-12
Brakes engaged without driver input after stability system disabled message
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Fault
- "STABILITY SYSTEM DISABLED" WAS DISPLAYED PRIOR TO THE BRAKES BEING ENGAGED WITHOUT DRIVER INPUT.
- Remedy
- THE VEHICLE WAS TAKEN TO THE DEALER AND A 'YAW SENSOR' REPLACED. (1 more)
Manufacturer communication2004–2005 GMC YUKON ・ 2005-04-19
Service Stability Message Displayed
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- SERVICE STABILITY MESSAGE DISPLAYED. *EH
Manufacturer communication2004 GMC YUKON DENALI ・ 2004-12-14
Intermittent Service Stability Message and DTC C0550
1Fault
2Finding the cause
Not stated
3Correction
INTERMITTENT SERVICE STABILITY MESSAGE DISPLAYED, HISTORY DIAGNOSTIC TROUBLE CODE C0550. *TT
Read the sentences of the record
- Remedy
- INTERMITTENT SERVICE STABILITY MESSAGE DISPLAYED, HISTORY DIAGNOSTIC TROUBLE CODE C0550. *TT
SERVICE BRAKES, HYDRAULIC2
Manufacturer communication2003–2004 GMC YUKON ・ 2003-12-04
Service Stability Message and DTCs C0455/C0550 Set
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- SERVICE STABILITY MESSAGE AND DIAGNOSTIC TROUBLE CODES (DTCS) C0455 OR C0550 SET. *TT GM ADMINISTRATIVE MESSATE. *TT
Owner complaint2004 GMC YUKON DENALI ・ 2008-11-12
Traction control message after stop, vehicle sluggish to accelerate
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Fault
- 2004 GMC YUKON DENALI - TRACTION CONTROL MESSAGE COMES ON AFTER A STOP WHEN YOU START TO GO AGAIN AND IT FEELS LIKE THE VEHICLE DOES NOT WANT TO GO.
- Inspection
- WE HAVE TAKEN IT IN SEVERAL TIMES FOR THIS ISSUE BUT COULD NOT FIGURE OUT WHAT IT WAS DUE TO NO CODE IN THE COMPUTER.
ELECTRONIC STABILITY CONTROL1
Manufacturer communication2003–2005 GMC YUKON ・ 2004-08-23
StabiliTrak Malfunction or Disable Message on DIC
1Fault
2Finding the cause
Not stated
3Correction
UNWANTED STABILITRAK ACTIVATION OR STABILITRAK DISABLE MESSAGE APPEARS ON THE DIC. *TT
Read the sentences of the record
- Remedy
- UNWANTED STABILITRAK ACTIVATION OR STABILITRAK DISABLE MESSAGE APPEARS ON THE DIC. *TT
UNKNOWN OR OTHER1
Manufacturer communication2004 GMC YUKON ・ 2004-07-03
StabiliTrak Unwanted Activation During Sweeping Turns
1Fault
2Finding the cause
Not stated
3Correction
Read the sentences of the record
- Remedy
- UNWANTED STABILITRAK ACTIVATION DURING SWEEPING TURNS. *TT
