GMC Yukon 2000–2006
Common on this vehicle:
issueTransfer case speed sensor connector locks bend on disconnect (improved connector)Remove
Record by record
1 records state a cause or a remedy. Each record is shown as short labels in the order fault → finding the cause → correction. Press a label to narrow to the records that state it.
Read the records one by one (1)
Known issuesTransfer case speed sensor connector locks bend on disconnect (improved connector)1
Manufacturer communication2000–2006 GMC FULL-SIZE AND MID-SIZE PICKUPS AND UTILITIES (YUKON) ・ 2007-03-01
1Fault
- The plastic locks of the transfer case mounted speed sensor connector flex or bend during disconnect.
2Finding the cause
Not stated
3Correction
Repair
- Use the improved connector for field repair.
- The reference given for this row is 06-04-21-001.
Caution
- Do not use the old part.
Read the sentences of the record
From the manufacturer’s document
- Applies to:The row is for 1997-2007 Full-size and Mid-size Pickups and Utilities, H2/H3, Saab 9-7X, SRX and STS whose transfer case mounted speed sensor connector plastic locks flex or bend during disconnect.
- Condition:The plastic locks of the transfer case mounted speed sensor connector flex or bend during disconnect.
- Repair:Use the improved connector for field repair.
- Caution:Do not use the old part.
- Repair:The reference given for this row is 06-04-21-001.
Open this issue of GM TechLink ↗ The points above are read from an article of TechLink, GM’s monthly publication for dealership technicians. The article itself is not reproduced here.
- Remedy
- Powertrain Issues — Fix It Right the First Time 1997-2007 Full-size and Mid-size Pickups and Utilities, H2/H3, Saab 9-7X, SRX, STS - Transfer case mounted speed sensor connector plastic locks flex/bend during disconnect Transfer case mounted speed sensor connector plastic locks flex/bend during disconnect Use improved connector for field repair. Don't use old part. Don't use old part. 06-04-21-001
