Skip to content
FaultCrate

This is an open preview: every record can be read without an account. The details of the plans are in preparation.

GMC Yukon 2000–2006

GMC YukonModel years 2000–2006

Change vehicle →
Clear the search
1 conditions added

Common on this vehicle:Gauge or instrument faultNoiseWarning lightCorrosion or rustLeakReduced brakingAir conditioning or heaterVibration or shudder

Possible causes

Noise246 records
Exhaust and emissions
Steering
Engine
Brakes
Heating and air conditioning
Instruments and lighting
13Exhaust pop or ping noise (replace the heat shield, not the exhaust system)12Steering intermediate shaft clunk1Power steering pump whine between idle and 2000 rpm1Tire scrub noise on low speed turns (steering rod / centerlink installed backwards)7Single-cylinder misfire (P0300-P0308) and/or chirp, squeak or tick at camshaft speed: worn cam lobe / lifter, valve or valve spring1Accessory drive belt whine (power steering pump pulley repositioned)1Engine vibration or noise at idle felt in the steering wheel or seat (reprogram the PCM)0Oil pump pickup (screen) O-ring cut: engine tick / lifter noise0Rear bank knock sensor corrosion from water intrusion (P0332)3Unwanted ABS activation at low speed (front wheel speed sensor mounting corrosion)3Parking brake linings worn out prematurely, parking brake does not hold (PBR single-shoe drum-in-hat)1Buzz at the accelerator pedal on the first acceleration after start (Supplemental Brake Assist self-test, normal)1Hydro-boost brake assist and power steering share one hydraulic supply (four campaigns)1Electronic Brake Control Module3Engine compartment noise with A/C on and A/C inoperative (auxiliary rear A/C: suction hose and compressor)1HVAC actuator clicking / ticking noises (recalibrate the HVAC control module, do not replace actuators)1Rear HVAC ticking noise, no rear temperature or mode control, DTC B0434 / B3764 (revised auxiliary HVAC control module)1Air Conditioning Compressor3Instrument panel cluster gauges stick, flutter or stop working
27 causes not drawn

The documents say what to doOnly records name itThe size of a node, the width of a link and the numbers are records matching this search, not likelihoods.

Candidate cause (the documents say what to do)

HVAC actuator clicking / ticking noises (recalibrate the HVAC control module, do not replace actuators)

The condition is clicking/ticking noises from an HVAC actuator.

What to do

  1. Recalibrate the HVAC control module(s).

Caution: Do not replace the actuators.

In the records

No record states work done for this cause.

See the evidence (1 technical documents, 1 records)

Passages of the technical documents

  • 2004-06 H2, Fullsize Pick-ups and Utilities - HVAC actuator clicking/ticking noises

    General Motors 2007-01-01

  • H2, Fullsize Pick-ups and Utilities - HVAC actuator clicking/ticking noises

    General Motors 2007-01-01

  • Recalibrate HVAC control module(s)

    General Motors 2007-01-01

  • Don’t replace actuators

    General Motors 2007-01-01

Read every statement and its source →

Records

None among the records that can be opened now.

See all 1 records of this cause →

A cause or a result a complaint states is the owner’s view or what a dealer told them, not an established fact.