EngineModel years 2001–2006Manufacturer
Castech cylinder head porosity crack (gradual coolant loss)
2001-2006 GMC Envoy, Jimmy, Sierra, Yukon Models with 4.8L, 5.3L, or 5.7L Vortec Gen III / Gen IV V8 (RPOs LS1, LR4, LM7, LH6, L33, L59)
FaultCrate・Castech cylinder head porosity crack (gradual coolant loss)
Some vehicles may lose coolant gradually over time.
A very low percentage of cylinder heads with an embossed Castech logo may develop a porosity crack in a very specific area.
What to do
- Inspect the cylinder head to determine whether the casting was made by Castech.
- On a Castech casting, inspect around the five oil drain holes for witness marks of coolant seepage.
- The crack can be at any of the five cylinder head oil drains and shows as a clean or shiny area on an otherwise stained surface.
- Pressurizing the cooling system may reveal coolant, air, or both weeping in that area.
- Check whether the head is a Castech casting by looking for the casting logo on top of the intake port, under the rocker arm support rail and in the spring deck cavity portion of the cylinder head.
- If coolant witness marks are found, replace the entire cylinder head assembly.
Caution
- If the heads are not Castech castings, follow normal diagnostic procedures to find the cause of the coolant loss.
Applies to
- The bulletin covers 2001-2006 GMC Envoy, Jimmy, Sierra and Yukon models.
- It applies to the 4.8L, 5.3L or 5.7L Vortec Gen III / Gen IV V8.
See the evidence (2 documents, 11 passages)
| Document | Publisher | Date |
|---|---|---|
| [1]06-06-01-019C: Information on Gradual Coolant Loss Over Time with No Evidence of Leak Found ↗ | ManufacturerGeneral Motors (published by NHTSA) | 2024-03-14 |
| [2]06-06-01-019C Information on Gradual Coolant Loss Over Time with No Evidence of Leak Found ↗ | ManufacturerGeneral Motors | — |
Applies toThe bulletin covers 2001-2006 GMC Envoy, Jimmy, Sierra and Yukon models.
2001-2006 GMC Envoy, Jimmy, Sierra, Yukon Models— [1] Models
Applies toIt applies to the 4.8L, 5.3L or 5.7L Vortec Gen III / Gen IV V8.
with 4.8L, 5.3L, or 5.7L VORTEC® GEN III, GEN IV V8 Engine— [1] Models
First signsSome vehicles may lose coolant gradually over time.
Some vehicles may experience a gradual coolant loss over time.— [1]
Why it happensA very low percentage of cylinder heads with an embossed Castech logo may develop a porosity crack in a very specific area.
A very low percentage of cylinder head(s) manufactured with an embossed Castech logo may develop a porosity crack in a very specific area.— [1]
How to confirmInspect the cylinder head to determine whether the casting was made by Castech.
Inspect the cylinder head assembly to determine if the casting was manufactured by Castech.— [1]
How to confirmOn a Castech casting, inspect around the five oil drain holes for witness marks of coolant seepage.
inspect the area around the five oil drain holes for witness marks indicating coolant seepage over time (2).— [1]
How to confirmThe crack can be at any of the five cylinder head oil drains and shows as a clean or shiny area on an otherwise stained surface.
The crack location can be found in any of the five-cylinder head(s) oil drains. This can be seen as a clean or shiny area, on an otherwise stained surface (1).— [1]
How to confirmPressurizing the cooling system may reveal coolant, air, or both weeping in that area.
Pressurizing the cooling system at this time may reveal coolant, air, or a combination, weeping in the described area.— [1]
RepairIf coolant witness marks are found, replace the entire cylinder head assembly.
If inspection reveals evidence of coolant witness marks (1), replace the entire cylinder head(s) assembly.— [1]
CautionIf the heads are not Castech castings, follow normal diagnostic procedures to find the cause of the coolant loss.
If the cylinder head(s) are Not a Castech casting, follow normal diagnostic procedures in SI to determine the cause of the coolant loss.— [1]
How to confirmCheck whether the head is a Castech casting by looking for the casting logo on top of the intake port, under the rocker arm support rail and in the spring deck cavity portion of the cylinder head.
This can be accomplished by inspecting for their casting logo located on top of the intake port, under the rocker arm support rail and in the spring deck cavity portion of the cylinder head.— [2]
Put together by FaultCrate from public records and technical documents. The cause and the repair are for the workshop to decide with the vehicle in front of it. Counts are records, not failure rates.
List the records (1 that can be opened)
Records whose recall number, document number or text matches. Each line says why it matched.
- Internal Coolant Leak from Cylinder Head LocationManufacturer communication 2024-03-19・document number matches