Manufacturer communication — 2006 GMC YUKON DENALI XL

• Applies to 2003–2023 GM passenger cars and trucks.

  the passage

  2003–2023 GM Passenger Cars and Trucks

Steps to confirm (in the document’s order)

1. The engine bar code tag could be on a rocker arm cover, on the ends of a cylinder head, or on the oil pan or oil rail area of the engine.

   the passage

   The engine bar code tag is usually in one of several places. The bar code tag could be on a rocker arm cover, the ends of a cylinder head or on the oil pan or the oil rail area of the engine.

2. All remanufactured engines have a label on the right or left side of the block.

   the passage

   All remanufactured engines have a label (1) on the right or left side of the block.

3. On the 4.8L/5.3L/6.0L/6.2L (Gen III/Gen IV) engines the remanufactured engine label is on the left side of the block.

   the passage

   Left Side of Block • 2.2L/2.4L (Ecotec) • 4.8L/5.3L/6.0L/6.2L(Gen III/Gen IV)

Caution

• If a piston must be replaced, measure the cylinder before ordering; most of these engines have oversized cylinders, and oversized piston ring packs are not available for service.

  the passage

  If piston replacement is required, be sure to measure the cylinder before ordering a piston. The majority of these engines have oversized cylinders and oversized pistons ring packs are not available for service.

• If crankshaft bearings must be replaced, measure the crankshaft before ordering; a crankshaft that has been turned must be replaced, together with all new standard size bearings.

  the passage

  If crankshaft bearing replacement is required, be sure to measure a crankshaft before ordering bearings. If the crankshaft has been turned, it will require replacement with all new standard size bearings and crankshaft.