Manufacturer communication — 2006 GMC YUKON

• The model list includes 2000-2006 GMC Yukon models.

  the passage

  2000-2006 GMC Yukon Models

• Pre-formed and pre-flared hydraulic brake pipe kits have been released; they can be used anytime the entire brake pipe assemblies need replacement.

  the passage

  Customer Care and Aftersales (CCA) has released pre-formed and pre-flared hydraulic brake pipe kits. These kits can be used anytime replacement of the entire brake pipe assemblies is required.

Repair

1. In the utility procedure, remove the 6 left side body mount bolts and the core support mount bolt.

   the passage

   Remove the 6 left side body mount bolts and the core support mount bolt.

2. Tighten the brake pipe fitting tube nut to 18 lb ft (= 24.4 N·m) (the metric figure is printed as "25 Y").

   the passage

   Tighten the nut to 25 Y (18 lb ft)

3. Bleed the hydraulic brake system, referring to Hydraulic Brake System Bleeding in SI.

   the passage

   Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding in SI

Parts

• The parts table lists kit part number 22933217 for model years 2000-2002, K model 15706, option usage &JC5-JL4, torsion bar front suspension.

  the passage

  100 2000-2002 K 15706 &JC5-JL4 Torsion Bar 22933217

• The parts table lists kit part number 22932593 for model years 2003-2006, K model 15706, option usage &JC4/JH2-JL4, torsion bar front suspension.

  the passage

  102 2003-2006 K 15706 &JC4/JH2-JL4 Torsion Bar 22932593

• The parts table lists kit part number 22932591 for model years 2003-2006, K model 15706, option usage &JC4/JH2&JL4, torsion bar front suspension.

  the passage

  105 2003-2006 K 15706 &JC4/JH2&JL4 Torsion Bar 22932591

• The parts table lists kit part number 22933219 for model years 2000-2002, K model 15906, option usage &JC5-JL4, torsion bar front suspension.

  the passage

  108 2000-2002 K 15906 &JC5-JL4 Torsion Bar 22933219

• The parts table lists kit part number 22932594 for model years 2003-2006, K model 15906, option usage &JC4/JH2-JL4, torsion bar front suspension.

  the passage

  112 2003-2006 K 15906 &JC4/JH2-JL4 Torsion Bar 22932594

• The parts table lists kit part number 22932592 for model years 2003-2006, K model 15906, option usage &JC4/JH2&JL4, torsion bar front suspension.

  the passage

  117 2003-2006 K 15906 &JC4/JH2&JL4 Torsion Bar 22932592

Caution

• The kits include all the pre-formed and pre-flared brake pipes needed to replace the entire brake pipe assembly, except the rear axle crossover pipe.

  the passage

  These kits include all the pre-formed and pre-flared brake pipes needed when replacing the entire brake pipe assembly, except the rear axle crossover pipe.

• The procedure is not intended for the repair or replacement of a single damaged brake pipe.

  the passage

  This procedure is not intended for the repair or replacement of a single damaged brake pipe.

• Before removing any brake pipes from the master cylinder, ABS module (BPMV) and the brake pressure proportioning valve (where equipped), identify the port locations.

  the passage

  Before removing any brake pipes from the master cylinder, ABS module (BPMV), and the brake pressure proportioning valve (where equipped) identify the port locations.

• If the pipes are not installed in the correct port locations on all the hydraulic components, the brake system including the ABS and/or the TCS/VSES StabiliTrak system (where equipped) will not operate correctly and the hydraulic brake components may be damaged.

  the passage

  If the pipes are not installed in the correct port locations on all the hydraulic components, the brake system including the ABS system and/or TCS/VSES Stabiltrak system (where equipped) will not operate correctly and may result in damage to the hydraulic brake components.

• The kit pipes have a nylon coating for better corrosion protection and may have slightly different shapes and bends, so they may not exactly match the pipes being replaced.

  the passage

  These pipes have a nylon coating to provide better corrosion protection and may have slightly different shapes and bends and may not exactly match the brake pipes being replaced.

• Remove the brake pipes from the existing routing clips carefully, because all the clips will be re-used.

  the passage

  Remove the brake pipes from the existing routing clips carefully to avoid damaging the clips as all the clips will be re-used.

• Only raise the body enough to gain hand access to the brake pipe routing clips, and avoid stressing hoses and wiring harnesses.

  the passage

  Only raise the body enough to gain hand access to the brake pipe routing clips. Pay careful attention to avoid stressing hoses and wiring harnesses.