本文へ移動
FaultCrate

公開準備中のため、いまは登録なしですべての記録を閲覧できます。プランの詳細は準備中です。

選択中の車種: 2006 · GMC Yukon XL Denali

車種を変更 →

← 症例へ戻る

NHTSA Manufacturer Communications 10114954

原文と出典

原文

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.

提供元のページを開く(外部)

出典

情報源
NHTSA Manufacturer Communications — メーカーがディーラーへ出した通知(行政機関が要約を公開)
報告者の区分
メーカー
情報源での番号
10114954
国・市場
US
言語
en
文書版
第2版(保持2版)
情報源についての注記
US federal government dataset of communications manufacturers sent to dealers. NHTSA publishes a summary of each communication, not its full text.

日時

発生日
不明
情報源の受付日
2017-08-15
情報源のファイルへの追加日
2017-08-15
発行・公表日
2015-12-09
初回観測
2026-10-05 11:21 JST (初回の一括取得)
この版の取得
2026-10-05 12:49 JST